 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubleshooting a kitchen faucet with no pressure
Just had a brand new Delta faucet installed. Water pressure was fine, but hot water dripped a little. Installer worked on it for a while and left showing us no leaks and good pressure. Now 1 week later cold water and spray hose work great, but hot water turned on full just trickles out of faucet and nothing from the spray hose. What can we do, other than call the contractor back for another service call?
|
||||
|
||||
|
What your p-lumber failed to do when he had the valve apart was to flush out any minerals he disturbed in the pipes and now they're clogging up the inlet ports of the cartridge. You can recall him on warranty or you can shut the water off and open up the valve. Pull the cartridge and check and clear the inlet port. Now turn the water back on for a moment to flush out the supply. Reassemble and test. Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
No water coming out of the kitchen faucet or side spray
I have no water coming out of the kitchen faucet or the side sprayer but I do have water in the bathrooms.
I am a new homeowner, and this situation scares me. The faucet in my kitchen is not putting out any water pressure. It's a steady slow stream. It had been working fine until a week ago. I'm worried it might be a leak. :eek: All of the other faucets in the house are working fine. Any & ALL help...
I replaced my single handle kitchen faucet to a double handle faucet. (No special reason.) I added a sprayer also. Everything has worked great, which has been about 3 months up until about a week ago. I have good pressure when I turn on either the cold or hot, but when I turn on the other, the...
View more questions Search
|
