Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Won't stay running
[ 2 Answers ]
I have a 1990 mitsubishi montero 4wd 3.0L 6cyl engine.I have just changed head gaskets on it and now it won't stay running,it starts fine every time and runs for a min and if I hold the gas pedal it stays running,but as soon as I let go it dies.so can anybody please tell me what the problem could...
Will not stay running!
[ 1 Answers ]
Once I crack my riding mower, it will run for about 5 seconds and then die. I have rebuilt the carb. And put new spark plug and fuel filter, but still doing the same thing
Won't stay running
[ 1 Answers ]
I have a 17.5 hp b&s sears tractor. I can start it and mow for a short period and the mower will quit on me. I can start it again, but it will not stay running. I have replaced the air filters, fuel filter and fuel line. I have installed a new battery, disconnected the safety shut off switches,...
Won't stay running
[ 0 Answers ]
Riding lawn mower problem can't engage blades or release clutch without stalling! I believe it is the ignition switch?
Won't stay running
[ 14 Answers ]
I have a 91 crx it sat up since may and I just put a d15b vtec in this past weekend. I sat the engine in and hooked up all appropriate connectors with the exception of two wires that is close to the intake manifold (yellow w/ green and a black) I have no clue where they go all I know is if you... View more questions Search
|