Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cable sizing for a 110' run @ 50 amps
[ 1 Answers ]
I'm installing an outdoor spa approx 110' from the main disconnect. I've installed 11/4" pvc conduit to a jct box approx half way to the 50Amp gfi disconnect. I'd like to know what size power cable to use before I finish the conduit. I have enough #4 for 4 runs to the jct box. From there I'd like...
What size cable should I use to run a winch on a 4wd
[ 4 Answers ]
I am going to fit a 12,000lb 4WD winch to my boat trailer and power it from the car batteries when retrieving the boat which weighs 4,500Lb. The Amp draw for the winch is: Line Pull (lbs./ kg] Line Speed FPM(m/min) Motor (Amps) 0 33.3 ft (10.3m) 85 4000 (1814) 16.8ft (5.1m) 158 6000...
Cable size 120 mm2 with matching lug size
[ 5 Answers ]
Cable size 120 mm2 with matching lug size
Cable size for 200 amp/600 foot run
[ 1 Answers ]
My friend is building two small homes on a hill 600' away from his inlaws orchard that has a 400 service panel for the pumps. He wants 200a underground the 600' then split to two 100a services for each home. Someone came out and ran 1awg in a two inch conduit. Nit that I'm a electrician or anything...
Difference between 110 V and 220 volt rating cable
[ 9 Answers ]
In usa domestic voltage is 110 volt whereas in britain and asia we use 220 volt. I was asked that whether can we use american cable for 220 volts supply. I know the current carrying capacity is based on the cross sectional area of the conductor and insulation thickness. In usa AWG is used whereas... View more questions Search
|