Ask Experts Questions for FREE Help !
Ask
    apait1's Avatar
    apait1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2012, 06:03 PM
    Goodman gas pack
    The burners come on then cycle off after a few seconds, then come back on and stay on until it is suppose to cycle off. My hvac guy replaced the burner chamber thinking this was the problem but this did not take care of the problem. Any input into this problem would be greatly appreciated. Thanks and have a wonderful summer.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Apr 27, 2012, 07:32 PM
    The first thing I would try is to clean all burners and flame sensor, check and recheck and then check again the gas pressure going through the gas valve. Some times you have to cycle the equipment under extreme circumstances for the problem to show.
    oneoldjimmy's Avatar
    oneoldjimmy Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 28, 2012, 10:20 AM
    This sounds to be a dirty flame sensor to me as well
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Gas Pack? [ 1 Answers ]

Why does the air coming from flue on side of gas pack so hot

Goodman gas pack [ 1 Answers ]

We have two seven year old goodman systems and one is operating fine. The second gas pack will not fire on a rainy day! All other times it operates well - hot or cold. When its raining the induced draft fan kicks on and the unit goes through its 3 firing cycles before it shuts down completely. ...

Goodman Gas pack blower [ 2 Answers ]

My goodman gas pack heat comes on but the blower may not come on for up to 20 min. Is there a thermastat inside the unit that I can check? Model # GPG12360901A Big Doggie

Goodman gas pack not firing [ 1 Answers ]

I own a Goodman Gas pack model GPG1024 that has failed 4 times in the past month. It usually goes out during the night. I find that the blower is running but no ignition is occurring. On the circuit board the LED light is flashing twice signifying the pressure switch is stuck open( I don't...

Goodman Gas pack won't ignite [ 1 Answers ]

I have a Goodman Gas pack, model # GPG10300701A, the exhaust bloewr on the side will come on as usual but the unit will not ignite. Usually when it comes on it will tick tick ignite, but I am not getting the spark(tick), its like there is no attempt to ignite. I keep seeing quotes about LED blink...

View more questions Search