Ask Experts Questions for FREE Help !
Ask
    jhilman46's Avatar
    jhilman46 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2012, 12:25 PM
    What causes oil to go into carburetor on 16 hp ohv briggs and stratton engine
    What causes oil to blow through tube into carburetor and how do I fix it?

Check out some similar questions!

Briggs & Stratton 18.5 HP OHV with gas in oil [ 2 Answers ]

I bought this Yard Mach. Mower used last year--it ran great all season and I occasionally went to the shed and started it through out the off season. Last time I started it I checked the oil, put a little extra gas in it (it was low) and started it up. It ran well for about 2 min then started to...

17 HP OHV Briggs& Stratton Engine [ 2 Answers ]

Will this engine run without a battery once jump started?

Murray 16.5 HP OHV Briggs & Stratton engine [ 1 Answers ]

I have a murray with a Briggs & Stratton Engine. Have a new battery, new starter, and silonoid. When you turn the key, the engine turns a little bit and locks up. Take plug out and fuel pours out of engine. Turn key with no plug to get fuel out, put plug in will start. Once started, it will...

16.5 HP Briggs and Stratton OHV no fuel to engine [ 1 Answers ]

I have a 10 year old Sears mower with a Briggs and Stratton 16HP OHV engine. Last week it started blowing tons of white smoke and stopped running. After some research I decided to change the head gasket and generally clean up the engine. Changed the gasket - no problem, cleaned the bypass valve,...

Briggs and Stratton Vanguard OHV Engine [ 1 Answers ]

I have a new Briggs and Stratton 8000 watt generator powered by a Vanguard 15 hp overhead valve engine.Since it came from the factory it has a popping sound from the muffler as it runs. It seems as though there is a misfire. The spark plug has been changed and the spark is in spec. Service dealers...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.