 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat screen blinking on and off
My vision pro TH8110U thermostat screen was blinking on/off (bright/dim). It also made faint clicking sounds as it blinked. It would not respond to touch on any part of the screen. I flipped the breaker switch off, then on (it had not tripped).
The screen now responds, the system seems to be operating normally, and there are no indicators on screen indicating any issues. I replaced the three triple A batteries "just in case." ( the entire havoc system and thermostat are 8 months old). Any idea why the screen was behaving that way? We were out several hours, and the house was warm, the system was not cooling. After resetting the breaker, the system is cooling. Leave well enough alone and wait to see if it happens again? |
||||
Check out some similar questions!
My daughter has a Gateway 450 RGH laptop with Windows XP home edition on it; today when she went to log in it went straight to a black screen with a while blinking cursor in the upper left-hand corner. When I rebooted I did get the screen where you can do F10 or F2 and it would allow me to go to...
What do I do about a blinking thermostat code "L6"? Make is Bryant Is there anything I can do, or do I need a furnace repair service?
I am having problems try to boot up my computer. When it comes on all I see is a blank screen with the blinking cursor on it. I have a Dell E551 Monitor.
We have been in a newly built condo for just one year and have had no problem with the air/heat. Two days ago for the first time the Carrier Digital Thermostat starting blinking. It blinks with a blank screen and then blinks and you can see the digital info then back to a blank screen....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
