Ask Experts Questions for FREE Help !
Ask
    wayneborch's Avatar
    wayneborch Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2012, 06:02 AM
    Use of 20 amp outlet with 14 gauge wire
    I have several new outlets that I plan to install. The outlets are rated 20 Amps. Can I use these outlets with 14 gauge wiring? The breaker is a 15 Amp breaker.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Apr 20, 2012, 06:03 AM
    No. Just use 15 amp outlets, if you have something that needs 20 amps, you will need #12.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Apr 20, 2012, 01:18 PM
    Agree with Strat.
    Get the right ones. Devices are cheap.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire service, wire gauge 100 amp [ 9 Answers ]

I'm installing a 100 amp service in the backyard with a separate meter on a pole next to sub-suface power tranasformer. I have a 100 amp meter box on one side of the pole and a 100 amp braker panel with a 100 amp main breaker on the other side. I'm going to place in it a 15-20 amp breaker for gfi...

16 or 18 gauge wire to outlet [ 11 Answers ]

Hi guys! I have a small little camper. And I am going to mount a LCD TV (20 inch) on the side of the cabinet, and I wanted to run electrical to it, and terminate it at a plug. If I put a sticker or a label on the outlet that states, no more than 10 amps, or 1200 watts, can I do something like this?...

12-gauge wire will not fit in 20A outlet screw terminal [ 10 Answers ]

I have run conduit which came with 3-wire 12 gauge standed cable. I have it going to a 20A outlet, but all of the strands will not fit in the screw terminal. The breaker is a 15A. Can I trim a few of the 12 gauge strands to get the wire to fit onto the screw terminal? Are electrical outlets also...

12 gauge Wire Used w/ 14 gauge Outlet [ 6 Answers ]

Hello, I have a fairly new home I purchased. I am changing my outlets as I am painting the rooms (Laundry Room) and noticed that the previous home owner put in a laundry board (built in) and wired to the nearest outlet on the wall. They used 12 gauge wire to the outlet (from the built in iron...

Mixing wiring and outlet wire gauge . [ 5 Answers ]

If I have a 15 amp circuit, and 14 gauge wire, why can't I install a 20-amp outlet? If a 20-amp device is plugged into the outlet, won't the circuit trip, preventing overload? Also, 20-amp outlets and 15-amp outlets appear to have the same connection for devices (two prongs and a ground hole),...

View more questions Search