Blades will not disengage unless I TURN MOWER OFF

dansherrie Posts: 1, Reputation: 1

New Member

Apr 20, 2012, 11:09 AM

Blades will not disengage unless I TURN MOWER OFF

I have a 2003 LT2200 craftman mower. The blades will not disengae until I turn the mower off, Checked evrything I could lubed the pully worked back and forth still will not disengage until mower turns off. Anything I can do that would resolve this problem?

Check out some similar questions!

Blades won't disengage with mower running. [ 1 Answers ]

I have a Sears riding mower 17 HP, 42" Model # 917/271661 that engages the blades fine but will not disengage the blades unless I cut the engine off. There is a spring that provides resistance when I move the lever on the dash to engage the blades; should there be another spring that pulls the...

Mower blades do not disengage on my j.d. L130 [ 0 Answers ]

When I pull the p.t.o. Switch to disengage the magnetic clutch the blades will not stop turning, also the switch for operating the blades in reverse does not do anything when pushed

Mower deck blades do not disengage [ 1 Answers ]

I have a Sears 16.5 HP LT. The blades stay engaged even after I disengage them with the engage/disengage handle. I have to turn the engine off to completely disengage them. When I start the mower again the blades are disengaged. Is there some type of adjustment for this ?

Mower blades won't disengage [ 2 Answers ]

I have a MTD yard machine and the mower blades will engage but won't disengage. Any help on what could be wrong would be appreciated.

Mower blades won't disengage... any ideas? [ 2 Answers ]

I have a mid 90's MTD (Lowes label) that I bought on Craig's List. It runs fine, but just started acting strange. When I pull the handle (the one that lowers the deck) back, the blades are supposed to stop, but mine doesn't. They do slow down, but not too much. Any ideas?

View more questions Search

Check out some similar questions!

Add your answer here.