Thickness of nickel layer

pairika Posts: 1, Reputation: 1

New Member

Apr 17, 2012, 05:13 AM

Thickness of nickel layer

Calculate how thick layer of nickel is formed on a metal plate when a current of 100 mA is lead 30 minutes through a solution containing Ni2+-ions. The area of the plate is 0.10 m2.

Check out some similar questions!

How much per sq to tear off one layer shingles and one layer wood shakes [ 2 Answers ]

I'm wondering if I low balled a job its 12 sq 2 layer one layer shingles the second layer wood shakes ,replace 4 rafters,redeck,and shingle it I charged 1700.00 labor only

1912 v nickel [ 0 Answers ]

does anybody know the rough value of a 1912 v nickel

Who's picture is on the indian head nickel [ 2 Answers ]

I would like to know who's likeness was used to put on the buffalo/ indian coin 5 cents

Buffalo Nickel [ 5 Answers ]

Howdy again everyone! I have found a perfect condition, non-replica, readable Buffalo nickel! The ONLY thing I cannot read is the date. Any good prices? It looks really old but is in great condition. :) Thanks. Bye.

Create vlan - layer 3 and layer 2 [ 6 Answers ]

This is what I have Firewall (ISA) connected to GSM 7312(layer 3 switch) On GSM 7312(layer 3 switch): Port1 – 192.168.50.1 connected to firewall Port 2 – 192.168.60.1 connected to a 5 port Linksys switch Port 3 – 192.168.59.1 connected to a 5 port Linksys switch Port 4 – 192.168.0.1...

View more questions Search

Check out some similar questions!

Add your answer here.