Ask Experts Questions for FREE Help !
Ask
    dpletcher4's Avatar
    dpletcher4 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 15, 2012, 06:45 AM
    Circuit breaker troubleshooting
    50 amp gfci for hot tub will not reset have unhooked lines from tub and gfci panel
    And pulled fromm conduit breaker still doesn't reset with no load. Pulled breaker out of panel it will set with no power but test button won't trip it . Had power surge or something bad like that
    When common from pole to weatherhead broke or burnt . Did that burn up the gfci breaker? Since that I have gotten a new fridge, 371.00 in furnace repair,cant wait to see what else!
    Thanks ,
    Don
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
     
    #2

    Apr 15, 2012, 11:40 AM
    Dpletcher,
    GFCI breakers somewhere around 2003 or so where re-engineered due to numerous
    Failures due to surges... it sounds like the breaker you're describing has failed so why
    Not replace with new and call it a day, your hot tub may be safer as well!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

I have a Murray circuit breaker panel and want to add a circuit for a 3 prong elec dr [ 3 Answers ]

I have an electric 3 pronged dryer that I want to add a circuit for on my Murray Circuit Panel. What kind of switch do I need?

Circuit Breaker trips because two bathrooms and master bedroom on same circuit [ 6 Answers ]

Some electrician committed a blunder in my opinion about 17 years ago. The master bedroom and two full bathrooms are all on the same circuit. If two hair dryers are used at the same time, it will trip the breaker every time. In figuring out what amperage would be required for two hair dryers and...

Circuit Breaker Troubleshooting [ 4 Answers ]

I purchased an old farm with a water well. It was checked last summer with the pump company's pump (I assume they used their pump because there was no power at the property then) and it pumped well (15 gpm). Now I have electricity and tried to power up the pump. The fuses are the old...


View more questions Search