Ask Experts Questions for FREE Help !
Ask
    brotherunger's Avatar
    brotherunger Posts: 8, Reputation: 1
    New Member
     
    #1

    Apr 2, 2012, 12:05 PM
    How do you light a Magic Chef propane range for a 1993 Avion travel trailer?
    I don't have the model number do to the sticker being worn. How can I get an instruction/service manual?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Apr 11, 2012, 06:30 AM
    Look at gas valve and turn knob to "pilot" then either you will have a (Usually red) button to press or you will press in on knob to let gas flow to pilot light. After purging air from line it should light whereupon you will keep button or knob pressed in for a minute or so to get thermocouple hot enough to keep flame lit. After flame stays lit turn knob on gas valve to next step and you are done. If flame will not stay lit you may need to adjust it or replace thermocouple.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Magic chef [ 1 Answers ]

I need a blower motor for a magic chef combonation furnace/ac unit m# 66hwc24a-21 where can I pick one up at near south chicagoland area

Main burner of Magic Chef Ultra II furnace will not light [ 0 Answers ]

The main burner of my Magic Chef Ultra II furnace will not light normally. The furnace has an electronic ignition. Its blower, electronic igniter and pilot burner seem to be functioning normally, but the main burner won't fire up unless I blow on the pilot flame several times. When I do blow on the...

Magic chef fridge [ 1 Answers ]

I have a magic chef fridg the fridge side is 60degrees,what will cause this to happen?And how do I fix it?Thanks hope to hear from you soon

Magic Chef CSD2123AR [ 4 Answers ]

We have a refrigerator that isn't cooling correctly. Last week we lost power for a day. We had to turn off the main switch in the house until the power was restored. After it was restored and we turned on the main switch, the dial was set at 8. It isn't as cold as it should be. We didn't know...


View more questions Search