 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Remotes won't work; wall push will
Have old model genie from 1983 on double door with no sensors at bottom; wall push button works fine raising and lowering; we have 3 remotes (batteries in all are fine); but all remotes quit working on same day; then they would work for couple of days and quit for a week; now remotes have quit ; think for good this time. I've jiggled all the wires, to no avail.. My email is [email protected]... or give advice to me on board. Thanks, Betty C.
|
||||
Check out some similar questions!
Here's a curious one. My garage door opener (chain driven) works the door fine. The wall unit controller operates the door just fine. It's ALL the controllers that won't work. I have two individual remote units, one outside wall mounted remote unit, and one internal car unit. They will all...
I have a craftsman garage door opener & I can't get the keypad and the other remotes syncronized at the same time. I know how to syncronize each individually but to get them to work together has been a problem. Does any one have any Ideas?
Ok here's the deal and please bare with me, this might be kind of long. Anyhow here goes. I bought a new Hampton Bay fan that came with the remote control. It came with a wireless remote control and the receiver is built in to the fan housing. The previous fan was wired to three switches. (A...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
