Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I jump start an exhaust fan on a state select gas hot water heater?
[ 1 Answers ]
It has happened before and a repair person jumped it and ordered a thermacoupler but it has lasted a year. I want to try it again myself to see if I can avoid a bill. The pilot light is lit.
Exhaust Blower fails to start on gas furnace
[ 2 Answers ]
I have a tempstar furnace model # FBF075B12G1. The furnace is maybe 3 years old. The little motor which turns the exhaust gas blower feels a little hard to turn. There is some rust on top of it. It will sometimes fail to start, which keep the burners from kicking in. If I spin it by hand, it will...
MTD tractor won't start. Engine does not fire. Turns over, spark new, gas new.
[ 1 Answers ]
Quit running suddenly, won't start. New plug, new gas, filters clean, fuse good, safety switches working. Engine turns over, will not fire.
Could gas be blowing out exhaust manifold?
[ 4 Answers ]
I have a Craftsman lawn tractor with 17 HP OHV model # 311707-0132-E3. It stopped running & now when I try to start it, it won't. It will crank a couple of times, but then won't even do that. On closer inspection a see gas dripping out of the front especially when I tried to start it. It looks like...
Kenmore Elite gas dryer has no heat turns off when start button is released
[ 1 Answers ]
I have a Kenmore Elite gas dryer Model 11074992300. At first the dryer would run but there was no heat. Now the dryer will only run when the start button is pressed, as soon as it's released it stops running and still no heat. Does anyone know what it will need to be repaired? View more questions Search
|