Ask Experts Questions for FREE Help !
Ask
    jimwalsh_89506's Avatar
    jimwalsh_89506 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 2, 2012, 08:36 AM
    Spa disconnect Can I mount it on a post?
    I have concrete all around the area making it very hard to mount it to the house So I thought I could sink a post about 5ft away from the spa and mount my 50 amp gfci
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 2, 2012, 08:59 AM
    A post should be fine but we should know where you live so as to check codes
    jimwalsh_89506's Avatar
    jimwalsh_89506 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 2, 2012, 09:12 AM
    Marysville ca
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Apr 2, 2012, 09:52 AM
    CA has way too many unique codes for me to keep up. Call your local building dept to see if they allow it. Its fine for Illinois, but we shake less.
    jimwalsh_89506's Avatar
    jimwalsh_89506 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Apr 3, 2012, 07:08 AM
    Thank you for your efforts I will call the building dept
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Midwest spa disconnect [ 1 Answers ]

Trying to install midwest spa disconnect and the spa doesn't have a white neutral connection at the spa panel. It has a bare neutral, blk wire, red wire connection. Should I take the white neutral conn, to the bare wire grnd conn.

Mounting a spa disconnect on house [ 15 Answers ]

I finally purchased a spa and I think I have convinced myself that it makes sense to mount the disconnect on the side of the house, running 6/3 romex inside and then using #6 THWN in PVC conduit to connect to the tub. My question today is about the disconnect. To avoid needing to use THWN back to...

Connections for Midwest Electric 60A GFCI Spa Disconnect Panel [ 3 Answers ]

I'm installing a spa with a Midwest Electric 60A GFCI spa disconnect panel (#UG412RMW260P)between the spa and the house main service panel, but I'm confused which lugs in the disconnect box to connect the "hot" wires (Red & Black) to from my house service panel? This panel has two sets of lugs...

Spa disconnect [ 1 Answers ]

Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...

SPA disconnect switch grounding wire requirement [ 1 Answers ]

I'm installing a 240V/60A SPA approximately 85 feet from the house service panel. I'm going to run 3 individual #6 conductors (THN or better) from the service panel to the SPA GFI disconnect box via 1 inch PVC conduit. The SPA is about 7 feet from the disconnect box. The disconnect box instructions...

View more questions Search