Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dripping Delta tub faucet
[ 3 Answers ]
I have a dripping tub spout that I would like to fix. It is a Delta Monitor, single handle style. I figure I have to pull and replace the valve stem, but have no idea how. The stem looks like it is tightly integrated with the plastic sleeve that surround it. Also, am I correct on the part to...
Dripping Delta Single-handle kitchen faucet
[ 2 Answers ]
I have a single-handle Delta kitchen faucet that will not stop dripping. I did some research online and learned to buy a replacement kit to replace the interior workings of the faucet. I have done that, and have replaced every interior part, both O-rings, the springs and seals (which I am told is...
Removing Delta bathtub/shower single handle faceplate
[ 7 Answers ]
I am trouble-shooting a tub and shower that has gone to low flow, and I suspect I need to get at the mixer cartridge. I've got the faucet removed (white plastic pipe in pictures) and have gotten down to the faceplate, which is two pieces: the circular one in the center, and the larger...
Replacing single handle bathtub handle with 2 handles
[ 1 Answers ]
Hi, I am redoing the tile in my bathroom and want to change my single handle hot/cold fixture with a 2 handle fixture... Can I do this myself or do I need a plumber?. My house was built in the 1960's and the faucet seem original.. I do have access from the back and will have access in front once...
Delta two handle faucet
[ 1 Answers ]
I have a Delta two handle knob faucet in my bathroom. It had a very irritating leak so I purchased knew knobs and replacement parts at Lowe's. I replaced everything down the seats and springs... (except I think what's called the stem) At first, when I turned the water supply back on, the water... View more questions Search
|