Ask Experts Questions for FREE Help !
Ask
    warnutz2003's Avatar
    warnutz2003 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2012, 08:18 PM
    How to prime a dayton diaphragm well pump
    I need to know how to prime a dayton diaphragm well pump
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Mar 25, 2012, 07:47 AM
    I'm not familiar with this pump and can't pull up any information on it. I am, however familiar with a sewage diaphragm pump and I don't recall having to prim those. Is there a gage or plug you can remove from the top of the housing that you could water down? What's this pump used for? Can you furnish more information? Back to you, Tom
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Mar 26, 2012, 02:59 AM
    Not too sure what kind of Dayton pump you have. They make a wide variety. Try this site to get the info you need.

    http://daytonpumps.com/
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pump lost prime and overheated motor runs but does not pump is the pump fried [ 4 Answers ]

Over night the pump lost primed and melted the sched. 40 fittings I replaced all the fittings and cannot get pump to prime the motor runs is it possible that the propeller was damaged from the heat?//

How to calculat for Diaphragm tank V for a booster pump station include a Jocky pump? [ 0 Answers ]

How to calculate the Diaphragm tank "V" for a booster pump station include a 4 duty pumps and Jockey pump "Q 1p" each pump = 40 L/s. "Qj" Jockey Pump = 10.5 L/s. Can calcaulate based on each Q ? ("Q1p" , "Q4p" or "Qj")

Breaker on the well pump popped last night no water what do I do to prime my pump? [ 0 Answers ]

How to prime the pump for a well that serves a geothermac heat pump [ 0 Answers ]

The power went off for a while this afternoon. When it came back on... the pump had lost it's prime... how do I prime the work to get my air conditioning on again?

Water well pump won't prime I know but I can't get to prime [ 0 Answers ]

I know how to prime a water well pump but Icant get it to prime . How would I know if something wrong with the pump

View more questions Search