 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If the CEL consistently comes on for 2 seconds and then goes out, when the ignition switch is turned to ON (Position II), then focus on the distributor. Usually, replacing the Ignition Control Module (ICM) and coil solves the problem. Be sure to apply silicone heat transfer grease to the back of the new ICM.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Would someone be able to tell me if the wheels on an 1986 Honda Accord are interchangeable with those of a 1996 Honda Accord. Thank you
Picked up an EX Accord 97 model for a good price. When the key is turned to start, the main relay clicks once (new relay) and the fuel pump puts one small squirt out the fuel line and stops instantly. It is .1 of a sec, not 2 sec. There is no second click in the relay either. The engine light...
I have a 91 honda accord with problems. Bought used, (maybe by several owners). Ran good for a few weeks. Problem seems to have started when starter went bad. Replaced that, coil and rotary button.(Coil later proved to have been good)! Starter works good, turns over well, but not starting.Getting...
We have a 1993 Honda Accord Lx Stick, and it died about 2 weeks ago, after it sat for about 30 minutes it started again, we went to the parts store and they said it was to old to hook to the computer, but it souded like the fuel filter was bad, we replaced it (it wasn't good that's for sure) we...
I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.
View more questions Search
|
