Ask Experts Questions for FREE Help !
Ask
    Feanaro's Avatar
    Feanaro Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 24, 2012, 10:23 AM
    Need to fix Leaking Delta Monitor Shower Faucet
    Hi everyone,

    I have a leaking Delta Monitor shower faucet that I need to repair, but have a problem. When I went to remove the little hex bolt that holds the handle in place, I noticed that it was caked in mineral deposits. I put a bunch of CLR on it to remove the deposits, but the allen key would not budge. I did this several times. Finally, I tried WD-40, but no luck either. To make matters worse, it seems that the bolt has become stripped and the allen key keeps slipping now. Now What?

    Any help would be much appreciated!
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Mar 24, 2012, 11:26 AM
    Drill out the head with a small drill bit and try an easy out see if it will, if not then you have to out the head and try to remove the remaining of the screw, good luck.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Delta 1700 series monitor shower faucet [ 10 Answers ]

This has no allen screws and was installed in 2005 when the house was built. I went from an occasional drip to a steady drip. I looked at all the local stores and they do not carry the cartridge. So, I ordered one online. Now, how to install it properly?

I have a Delta 1400 faucet in my shower that has been leaking. I took the cartridge [ 3 Answers ]

I have a Delta 1400 faucet in my shower that has been leaking. I took the cartridge out and replaced the springs & washers and it still leaked. Someone suggested springs needed to be pulled out... did not help. Tried new cartridge in and leaked worse. Put the old one back in and tried putting...


View more questions Search