 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Repairing pool liners
We have two tares in each corner of our pool liner around 2 foot long. What is the best way to repair them and what should we use to repair them. I have been told to use the liner repair kits with the glue that comes with it. Is that a good idea. Also the pool liner is starting to sag. Can someone explain to me how to pull the liner back in place so it is tight.
Thank you Christie Diel |
||||
Check out some similar questions!
Re-using pool liners
[ 0 Answers ]
I have seen a lot of questions on here asking if pool liners can be reused. The answer is this... The hard way... As long as the pool liner remains wet and did not tear or rip then yes you should be able to reuse the liner, however, if the liner has been stored no matter how old or how long and...
Repairing an Above Ground Pool Wall
[ 5 Answers ]
Looking for an inexpensive way to repair the wall to our 18 ft Above Ground Pool. It has rust around the skimmer basket and spots all around the wall. I bought a new liner last year and ended up getting a hole in it due to the rust spots. Now that our kids are gone we don't use it enough to...
Vinyl pool liners
[ 1 Answers ]
I am having a vinyl inground pool installed. My question is do I have to install the brick coping prior to installing the liner??
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
