Ask Experts Questions for FREE Help !
Ask
    schrades's Avatar
    schrades Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2012, 11:41 AM
    Kenmore adaptive defrost problems model # 106.64239400
    The unit cools intermitantly. I have changed the start device and it continues to do the same. It will cool down for a couple of hours then it will warm up for a couple of hours. Freezer coils not blocked with ice. Temp control or adaptive defrost control? Any help would be appreciated.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 23, 2012, 07:23 AM
    It sounds like the electronic control (Part # 2304099 $84.75). The thermostat either is on or off and has no timing function like the control cited above. Units with analog controls are much more reliable.You have a lemon.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag/JennAir adaptive defrost control [ 1 Answers ]

Can a faulty board, let's say burned in a "defrost" mode, cause the entire refrigerator to stop working? It seems to me that the compressor won't run while the unit is in defrost mode and if mine is stuck in permanent defrost, it may explain why the compressor won't start. I have already replaced...

Kenmore Cold spot Model 106 - RUMBLING! [ 1 Answers ]

I have a kenmore coldspot refrigerator model #106 60192000 with a manufacture date of 09/00 is making a loud rumbling/vibrating noise. When you turn the temperature dial all the way down to the warmest setting it kicks down and stops rumbling. What is the noise? How do I fix it? I just started...

I was told by a GE tech rep. You can't adjust adaptive defrost. [ 1 Answers ]

I thought amplification adjustments was a design requirement. Without the resistors we would see infinity of course; however, with no way to adjust the probes ability to have an adequate threshold is insanity. I was told, just order a new board upon checking the thermistor probe for proper ohm's....

Maytag adaptive defrost control board [ 0 Answers ]

I need to find out where I can find the location of the adaptive defrost control board for my Maytag side by side refrigerator

Kenmore model 106 leaking water into bottom [ 1 Answers ]

I have a Kenmore refrigerator model 106 which is leaking water into the bottom of the refrigerator. The ice maker quit working about the same time the water puddling started. I have turned off the water source so I don't believe the puddling is coming from the icemaker.

View more questions Search