Display does't work(tv)

moze24 Posts: 1, Reputation: 1

New Member

Mar 18, 2012, 10:29 PM

Display does't work(tv)

Ihave my panasonic 32inch crt.It does not display but there is sound.when I removed the cover and powered it for sometime and switched off,I touched the board and realised that a transister was heating.Could it be the problem?

Check out some similar questions!

Rwd does't work. Troy bilt mower. New belt and wheels. What's next? [ 29 Answers ]

I have a troy bilt model series 830. The drive wheels don't work properly. They will spin when the lever is engaged and the wheels are off the ground, but as soon as they touch the ground, nothing. I've replaced the belt and the wheels (one was broken). Adjusted the cable. It will loosen and...

Furnace NUGK100DH08 does't work [ 1 Answers ]

My furnace NUGK100DH08 does't work. Ignition spriks , blower works. But no gas goes throuw . And no flame on the pilot.

A/c unit does't work [ 4 Answers ]

Hi, my name is mike and I have a lennox a/c unit that won't kick on , the inside blower Fan works but out side fan doesn't. All I hear is a click. A friend told me to replace The capacitor first. I replaced it and have the same problem.

No display on thermostat and AC does not work [ 1 Answers ]

This a carrier thermostat with multiple zones and it does not have batteries. After I opened the thermostat there are 4 wires red V+, White = VG, yellow = RS+ & green = RS-. What can I do at this point?

Plasma won't work as a display for my laptop . [ 1 Answers ]

In the past I have been able to use my plasma TV as a display for my laptop with relative ease. Basically I just connect it up via a vga cord and hit Fn/F4 which shoots the image up to the plasma. Each time you hit Fn/F4 it kind of scrolls through having the picture on both the laptop and...

View more questions Search

Check out some similar questions!

Add your answer here.