Ask Experts Questions for FREE Help !
Ask
    jbury's Avatar
    jbury Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2012, 10:59 AM
    Briggs and stratton carburator for intec 1/c 6.5hp
    Need carburator for troy built chipper with briggs/statton intec1/c engine 6hp
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Mar 17, 2012, 02:45 PM
    Most small engine shops will be able to get you one .
    Or you can look it up on Partstree.com.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

5hp briggs and stratton [ 2 Answers ]

I rebuilt the carb and checked to make sure that it was getting gas flow, I have checked and rechecked carb for dirt, etc.. Could there be carbon build up inside the mower keeping it from starting

Briggs and Stratton 15.5 intec cuts out [ 7 Answers ]

The engine on my Murray Sentinal ride on mower cuts out at random times.Sometimes it will go through 3 lawn mows with no problems and the next time it will cut out half way through as if the key was turned off.Some times it will restart and other times it won't. I pulled apart one of the wire...

16.5hp briggs & stratton [ 3 Answers ]

Motor starts and runs for 10-15 seconds and then dies. Noticed lot of gas around air filter. Had carb rebuilt and still same problem.?

Briggs and stratton 12.5hp [ 1 Answers ]

I just got a 28v707 12.5 hp rider. It doesn't start but turns over almost excessively easily. I have a weak spark but no attempt to catch even with starter fluid. No seen problems with the flywheel or the key.

View more questions Search