Check out some similar questions!

PDPCBET · Mar 12, 2012, 02:42 PM

Is there any reason why I should NOT use a Walker quadruplex cable which I received instead of the Appaloosa I was expecting?
The application is 88 feet overhead pole to pole.

tkrussell · Mar 13, 2012, 07:40 AM

I can find specs on Appaloosa, it is a 4 wire #4/0 ACSR

http://www.generalcable.com/NR/rdonl...Y0015R0410.pdf

I cannot find specs on Walker. Can you provide specs so we can compare?

PDPCBET · Mar 13, 2012, 01:11 PM

I had answered four hours ago but maybe it did't go.

I made an error in the name of the cable I received and it is actually called Walking!

It's a 4/0 quadruplex but with an aluminum messenger wire rather than steel.

tkrussell · Mar 14, 2012, 02:28 AM

I am unable to find Walking also, if it does not have a steel messenger, I doubt it is suitable for aerial installation.

PDPCBET · Mar 14, 2012, 12:56 PM

Southwire's site says the Walking has a 6201 aluminum alloy messenger wire which they say is the same 4/0 size and stronger than the steel!
(8560 lbs for Walking vs. 8350 for the Appaloosa)

stanfortyman · Mar 14, 2012, 01:16 PM

What could you possibly need 4/0 free air wire for?

tkrussell · Mar 14, 2012, 01:34 PM

Looks like your all set:

Originally Posted by PDPCBET

Southwire's site says the Walking has a 6201 aluminum alloy messenger wire which they say is the same 4/0 size and stronger than the steel!!
(8560 lbs for Walking vs. 8350 for the Appaloosa)

PDPCBET · Mar 14, 2012, 02:01 PM

I wanted to use 1/0 but with aluminum wire (cost) and the 100 feet I am going to get to the buildings, combined with the 200 amp disconnect at the meter pole and the 200 amp breaker box for the building I was forced to use 4/0. (Also, the cost to replace the two 200 amp breakers so I could use the 1/0 was $300)