Ask Experts Questions for FREE Help !
Ask
    ruudheater's Avatar
    ruudheater Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 10, 2012, 02:53 PM
    No heat. Thermostat won't even click on. Flipped breaker several times
    No heat. No images just freezing but off
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Mar 10, 2012, 02:56 PM
    Hi ruud and welcome, you'll need to give more information for anyone to help. Ok? Good luck
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Mar 11, 2012, 03:07 PM
    You have to use a meter to see what is happening otherwise you are just guessing and that does not work. Use a volt meter to see if you have power coming in, if yes then check to see if you have control voltage (24 volts), if no then check transformer and see if you have power going in and out. You will have to trace it out until you find where you have a break. You have to learn to use a simple meter.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Mar 11, 2012, 05:02 PM
    Batteries in t'stat?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GFI circuit breaker trips when flipped on. [ 2 Answers ]

Recently installed a hot but. All wiring is correct, and has been rechecked. When the breaker is flipped beaker on, it immediately trips. My electrican says there is no direct short, however there is enough resistance to cause the breaker to trip. Looking for someone thoughts on what is causing...

My kenmore dishwasher will start a cycle after I have flipped the breaker, why? [ 1 Answers ]

My Kenmore dishwasher will only start a cycle after I have reset the dishwater by flipping the breaker, what can I do to fix it?

Goodman heat pump does not click off when thermostat reaches desired temp [ 1 Answers ]

I have a goodman heat pump model #a32-10 controlled by a Honeywell Thermostat model #RTH3100C-installed last winter. Temperature in South Carolina this week has been ranging in the day in the lower to mid-40's and at night ranging in 20's or teens. I usually keep thermostat set between 66-68. The...

Click click noise when calling or heat [ 1 Answers ]

Bryant furnace model #394gaz036100aafa. The problem is click click turns on then it makes click click noise and shuts down Just wonder if I should replace my ignitor or flame sensor

Frigidaire dryer flipped breaker [ 3 Answers ]

Our dyer is only a year old, FEQ1442CEO, it flips the breaker if on any setting other than no heat. The dryer drum makes a horrible metal on metal sound.. does anyone have any ideas? Thanks

View more questions Search