 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2002 MZ Baghira 660
I'm in the process of looking at a 2002 mz baghira 660, I know that they don't make them any more so I'm not sure how hard it will be to replace parts like the rear brake pad, seat cover, and damaged plastic. The bike also has about 17k km on it, the handle bars are very slightly bent and the start up is a little bit slow. What would you recommend as a good buying price? Also, do I need to get specific brake pads and valves?
|
||||
Check out some similar questions!
Hi, I had to buy a new fitted tower at the weekend when my computer refused to boot. I had no choise in what was available to buy - Windows 7 or nothing. I managed to locate drivers to upgrade all of the equipment except the scanner. Epson do not care and have no intention of providing these...
I got 660 rank in PGECET-2010 in ST paper .give me some suggestions which college may come in counseling and which branch
I have a 2002 ford f350 7.3 powerstroke that's hard to start and hesitates when I take off. It seems like its sucking air and fuel system is bleeding down. Any ideas would be helpful
MTD 11/36 series 660 through 679 wiring I have an MTD 11/36 it was given to me because it would not start. After cleaning all the safety switches and what not I figured out it would start with a jump to the starter but realize solenoid may be bad. The battery reads 12.15 volts, wonder if that...
MTD 11/36 series 660 through 679 wiring I have an MTD 11/36 it was given to me because it would not start. After cleaning all the safety switches and what not I figured out it would start with a jump to the starter but realize solenoid may be bad. The battery reads 12.15 volts, wonder if that...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
