Ask Experts Questions for FREE Help !
Ask
    tambo1231's Avatar
    tambo1231 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 4, 2008, 01:20 PM
    Install shallow well pump
    I need some advice and a pipe diagram on installing a shallow well pump.It is replacing a jet pump I thinl]k that is what it was called,there was 2 pipe one was a return. The shallow well pump only calls for one pipe.Could I please get a piping diagram and some advice on installing the new shallow pump?
    CliffARobinson's Avatar
    CliffARobinson Posts: 1,416, Reputation: 101
    Ultra Member
     
    #2

    Mar 10, 2012, 09:56 PM
    The National Pump Company has a great PDF document with Jet Pump installation information and diagrams.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I need a Shallow well pump ? [ 9 Answers ]

:cool: Hi, I just bought a cabin that has a spring on the property up above the house at an entry elevation that is maybe 7-10' above the roof line. My spring flows into a shallow holding well then flows through 1" sprinkler line (Black plastic hose) The water must flow constantly because...

Shallow well pump [ 1 Answers ]

It will build pressure but as soon as it shuts off at 38lbs. It drops to 18lbs. In about 1min

Craftsman shallow well pump [ 2 Answers ]

Hi,I installed a 1/2 hp pump,to pump water out of a canal.The intake sets only 6 ft. below the pump.When I turn on the pump,it works fine, until it runs out of water. Then the pump keeps running.It has a 30 / 50 pre-set pressure switch.It has a built in check valve.No pressure tank.What do I do to...

How do you get water from a shallow well when pump will not suck water. [ 3 Answers ]

I have sunk a shallow well, (it does have water). I purchased a new pump. The pump does not suck water. I have primed the pump several times it does not want to suck water from the well. What do I need to do to obtain water.

New shallow pump-no water [ 3 Answers ]

Have 30 year old home with approx 30 year old 25' well.well not used for 3-4 years.installed new 1/2 hp pump with no tank.prime to top of plumbing,close valve and start pump.builds enough pressure to blow out primed fill but then stops pumping.how do I check for air.once empty can feel plenty of...


View more questions Search