Ask Experts Questions for FREE Help !
Ask
    taneblack's Avatar
    taneblack Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2012, 06:19 AM
    Best way to clean gas forced air furnace
    Can I steam clean it?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Mar 7, 2012, 08:10 AM
    Shop vac., don`t think I would steam clean,not good on the electrical componates
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Mar 7, 2012, 08:14 AM
    I agree, do not use water or steam. Shop vac and a crevis tool is all you should need.DIY Natural Gas Furnace Burner Cleaning - YouTube
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Forced Air Gas Furnace Fan Won't turn off [ 1 Answers ]

We have a Forced air gas furnace with a programmable thermostat. What is happening is that the furnace will turn on when the temp drops, like it is supposed to, and the fan will come on to blow the hot air, but the fan doesn't turn off. It will continue to blow even when the air is cold coming out...

Natural gas fired forced air furnace [ 2 Answers ]

Hi I have this 17 years old forced air gas fired furnace by Olsen. It has started to make humming noise when we turn it on. Does the blower motor need oiling. If anybody knows about it, please reply as how actually acess the motor to oil it or clean it. Thanks

Forced air gas furnace [ 1 Answers ]

I have a Rheem forced air gas furnace. The pilot will light manually and will run properly for a while, but it cuts off before reaching temperature and the pilot goes out. I've relit it several times, but it keeps doing the same thing. Any suggestions?

Pilot Light Forced Air Gas Furnace [ 2 Answers ]

How do I light it? I haven't had to do it in a couple years, and I have forgotten how. The knob has off, pilot, and on. I believe I turn it to pilot hold it it until light, and then turn to on. Is this correct? About how long should this take? Yesterday it was on, and working fine. I guess...

3 yr old Goodman Gas Forced Air Furnace problems [ 10 Answers ]

If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the...

View more questions Search