Ask Experts Questions for FREE Help !
Ask
    mariokheir's Avatar
    mariokheir Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2012, 09:44 AM
    How to check the refrigerant pump dimensions and characteristics
    If we exceed the maximum allowable distance between the compressor and the condenser. Please advise on how to check the required refrigerant pump in order to work around exceeding the allowable pipe length. Please advise us ASAP.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Mar 3, 2012, 07:49 PM
    Your installation guide should give you the minimum size copper line that can be ran for the length of your systems tonnage.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump refrigerant requirement for a 4 ton unit [ 2 Answers ]

I have installed an Intertherm 4 ton heat pump. I can pull a vacuum on the system, but do not know how many pounds of refrigerant the unit requires.How many pounds does a 4 ton unit requier? I tried to contact the Intertherm web sites and none of their tabs have a customer question category?

Do I need a Liquid refrigerant Charger to charge R410A to my heat pump [ 0 Answers ]

Circuit breaker characteristics water pump [ 0 Answers ]

I have water pump 20HP but it start in Y connectionbut when convert to delta C.B. make trip what type of C.B. I can use

2 ton heat pump, too much refrigerant? [ 6 Answers ]

I have a 2 ton rooftop package unit heat pump that blows warm air. I ckecked the refrigerant (r-22) with the ambient temperature being 95 deg f. The high side read 300 on the oustside of the gauge. Shouldn't it be closer to 125? I took these mesurements while it was running. Thanks.

View more questions Search