Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing ignition control module & coil on 1998 honda accord
[ 1 Answers ]
Can someone give me a detailed process on how to remove and install the ignition control module & coil on a 1998 honda accord. Thanks
Replacing ignition control module 92 accord LX
[ 4 Answers ]
Hi Everyone, I am trying to replace the ICM but I'm stuck. Cap's off, shield's off, rotor's off tried to remove screws holding plate which is blocking the screws holding the ICM. Is it better for me to just remove the whole distributor? Afraid of destroying the screw heads. Also there is also...
92 honda accord ignition troubleshoot!
[ 5 Answers ]
My car won't start and is not the batteryor the starter, what could it be?
1993 Honda Accord Lx Ignition
[ 1 Answers ]
I just replaced my cylinder key lock set because the key did not go in all the way and it didn't go all the way back to the off position. I replaced it thinking it would fix the problem. We installed it properly and it seemed fine it turned on and looked good but when we tried removing the key...
1991 Honda Accord Ignition
[ 6 Answers ]
Occasionally won't start and sets trouble code 4. Turn ignition switch off and it starts next time as if the main relay was bad. I haven't been able to catch it do this (my daughter drives it) as I would leave ignition switch on and start trouble-shooting it. Engine dies intermittently and sets... View more questions Search
|