Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New floor, but big hole where toilet was, need to raise floor to be level.
[ 1 Answers ]
We had a new tile floor put in our bathroom. When we had our plumber come in to put it the toilet he said he couldn't because the hole around the flange area wasn't level with the exsisting floor. Now we have a hole where our toilet was and a new floor. We need to raise the floor around the...
Raising the level of a caste iron toilet flange to the level of the floor tile.
[ 1 Answers ]
I have a similar problem as the person in a previous post. I installed one of those twist and sets PVC flanges right on top of my old caste iron flange but the top of the twist and set is still 3/8 inch below the tile. I am wary about using a double wax ring. Can I install one of those flange...
Toilet floor flange is now level with new subfloor
[ 6 Answers ]
If we subfloor our bathroom with 1/4 inch it will make the toilet flange level with the subfloor. Should we be removing the flange and raising it with the floor?
Toilet flange above floor level
[ 56 Answers ]
I've seen plenty about the opposite problem - maybe this is something less common: my toilet flange is above the anticipated floor level. I recently removed old tile from the bathroom floor, planning to install new tile. In so doing, I discovered that the old tile was set on about 3 inches of... View more questions Search
|