Ask Experts Questions for FREE Help !
Ask
    Axnjxn's Avatar
    Axnjxn Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2012, 10:52 AM
    Pressure switch
    Anyone know what the pressure amount should be when putting on a new pressure switch?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 25, 2012, 10:59 AM
    ??
    Pressure switch on what?
    Axnjxn's Avatar
    Axnjxn Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 25, 2012, 11:07 AM
    Carrier heating unit. Got it working though
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #4

    Feb 25, 2012, 11:12 AM
    I had a well pump that had a pressure switch,, I have a air compressure that has a pressure switch, I have a furnace that has a pressure switch, they all do somewhat the same kind of job, but they all are different, more info /any info might help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My gas furnace is not getting vacuum pressure for the pressure switch. [ 1 Answers ]

All the hoses were replaced as well as the pressure switch it self. I can jump it and it fires right up. It's a Heil model. The pilot light lights automatic. If you take the hose off that goes to the pressure switch and suck on it, it switches and the pilot light lights off. I don't know much...

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Pump pressure switch does not turn on with low pressure [ 0 Answers ]

I lost water in my home overnight. The pressure gage reads about 8 PSI. If I use the lever on the pressure switch to close the contacts, nothing happens. Actually, the pump controller box, makes a buzzing sound for a couple of seconds, but that's it. Does anyone have any thoughts? I don't...

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

View more questions Search