 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Becket burner model NX starts up hard/loud
Less than eight months old, this burner on a weil-McLain boiler, starts loud. Even more frustrating is the fact that loud noise at start up varies from day to day. Some days is very loud others some what softer. I have had the installer come back four or five times since installation still no fix.
Does anyone know if this is a set up problem or just a known Problem with Beckett burners? Boiler vents to a regular chimney flue. Thanks |
||||
Check out some similar questions!
Less than eight months older this burner with a weil-McLain boiler, starts quitely. Even more frustrating is the fact that loud noise at start up varies from day to day. Some days is very loud others some what softer. I have had the installer come back four or five times since installation still no...
Dear Reader from Ask Me: I have a Oil Heating system almost 10 year old with a Beckett Oil Burner. It has been very loud from the day One. RWB -Beckett Model AFG . I am wondering if a new Burner would be any quiter? Another problem I have is it starts works for a while stops and all of...
What is the correct nozzel for Becket Burner Nr AJ-254840?
Westinghouse nordyne oil furnace model 04md-091a-12-fa ran out of oil, refilled oil tank and bled out. It lights runs for about ten minutes and trips out, it re starts for 3 or 4 times, runs for about 5 minutes, then locks out. I bled it some more but it doesn't get better, what could it be?
My burner sometimes fails to light in morning after set back thermostat calls for heat. My service man checked pump pressure 100psi+and transformer, changed nozzle and electrodes. Unit still would not fire untell transformer raised. I believe this reduced air flow, unit fired and continued to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
