Ask Experts Questions for FREE Help !
Ask
    havendecor's Avatar
    havendecor Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 18, 2012, 07:36 AM
    Troubleshooting white-rodgers thermostat?
    I have a 1f78 model thermostat. Everything appears to work ,except when button put to heat, unit clicks off. I replaced batteries. Pilot lite/furnace works fine in other zones.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Feb 18, 2012, 08:40 PM
    You say other zones work fine, which makes me think you have more thermostats for those zones? Easiest way to trouble shoot is to take one of the other stats and put in in place of the one that is giving you fits. If it works just fine, you need a new stat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers zone valve troubleshooting [ 2 Answers ]

My 12s16 102 zone valve is not closing with thermostat setting change. How can I get a manual or t-shooting tips?

Troubleshooting for white Rodgers 1f78 [ 0 Answers ]

My thermostat turns on for a few seconds then turns off even after reprogramming or resetting. What should I do next to get the heater to start working? How do I stop it from turning on for a brief moment then turning off?

Troubleshooting a white-rodgers thermostat [ 3 Answers ]

I live in an apartment, had a White-Rodgers model # 1F80-361 programmable thermostat installed 3 months ago. I prefer a non-programable, so the installer set it so I could adjust it manually. Recently, I changed the time, which I shouldn't have bothered to do. Now, it defaulted back to factory...

White-rodgers thermostats troubleshooting [ 1 Answers ]

Nothing on screen. Changed the batteries but still nothing

White Rodgers gas valve 36e troubleshooting [ 3 Answers ]

I have a Lennox G23 furnace with a White-Rodgers 36E24-204 NG valve that continually is tripping the limit switch, due to a condition where the pilot is putting out way too much flame. I can see areas on the plate where the limit / rollout switch sits, and the flame has deposited large amounts of...

View more questions Search