Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
2-wire hook-up from a Carrier stat to a 3M30 Filtrete stat?
[ 0 Answers ]
Ok what I have is a Carrier {edge}. Removing it to install a Filtrete 3M30. I have two wires coming from the wall. One white & one red. The back plate to the Carrier has a 4-wire hook-up. From the wall wires red go's to V White go's to Vg Then there are two wires coming from the back of the...
Chromalox Comfort Control Thermostat
[ 0 Answers ]
We recently purchased a house that has electric baseboard heat. The thermostats seem to be original from when the house was built in 1976. We would like to upgrade the thermostats to digital but are unsure of what type to buy.
Replacement of a trane tay stat 241 thermostat
[ 1 Answers ]
I have an existing trane (6 wire) thermostat model tay stat 241 with the following the following terminals. y1, w1, w2, g1, r, b. each terminal has a wire connected. My new programmable digital thermostat is a honeywell rth 6300b that has 5 terminals. g, w, y, r,rc Please advise on how...
T-Stat replacement recommendation
[ 8 Answers ]
Hello, I have an old Honeywell Thermostat T8195B. I was wondering what would be a good replacement. Only have furnace heating. No cooling. Also, the location of the T-stat is in the a place where there is no forced heat vent so it is not the place to measure temperature. I know I can... View more questions Search
|