 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman furnace gas valve model 36c67?
I have a Coleman Furnace Model 7975-856. The Pilot randomly goes out. Sometimes the furnace cycles once and it goes out. Other times it may cycles several times before going out. I replace the thermocouple and cleaned the pilot, but still have the same issue. In effort to test the pilot itself, I turned the thermostat completely down and lit the pilot. It stayed lit that way for several hours with no issues. Once I turned the thermostat back up it went out after one or two cycles. Could it be the gas valve that is bad? And if so, any clue where to find a cheap one?
|
||||
Check out some similar questions!
On a coleman gas furnace model 7956A856 how do the blue and white wires connect
First, the gas valve on the pipe is on, I set the thermostat to supply heat, the furnace goes through the start up cycle normally, blower starts, inducer starts, pressure switch closes, ignitor glows but the gas valve doesn't open. Checked the limit switches, all show 26 volts, but no voltage at...
Older unit has a standing pilot. New couple still doesn't sustain pilot. Old Coleman unit. Can I rebuilt gas valve or should I just purchase one. Would prefer to build it.
Simple version... 36C67-189 White Rodgers Gas Valve, white and blue wires: which is TH and which is TR? Long version... I'm installing a new gas valve in my 1989 era coleman furnace (The correct modern replacement, the 36C67-189 White Rodgers Gas Valve). My furnace has a white and a blue wire. ...
I have an old furnace in a mobile home that kicks on and runs, but the blower fan keeps clicking on and off the whole time it runs when heating. What would cause that?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
