 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If I understand your question correctly, you have wall-mounted toilet and want to replace wax ring, correct..
Depends on what kind of toilet it is but most of wall-mounted toilets use "donut" seals. Some brands, like Geberit, use rubber washers with gills. To replace the seal, you will have to dismount the toilet, remove old ring, insert new seal and reset the bowl. Back to you. Milo |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I am installing a tile floor in my bathroom and the toilet bowl flange is about a 1/4 inch below the level of the floor. What is the variance I can have that the wax ring will correct for and is it better to be higher,(and by how much) or lower than the floor with the flange, if I cannot...
I have sewage odor radiating from my toilet bowl. I have checked the back and around the entire seat and the odor is definitely coming out of the bowl. I have drained the water and refiled it, but the smell came back within 3 days. The other bathrooms in the house are fine. The water in the...
My house is on a concrete slab. Toilet in question is in master bath with ceramic tile. The toilet bowl's water level, not the tank, would drop slowly, even over night & while no one was home, but it never seemed to completely empty out. I tried a test to watch the toilet water while I drained...
The toilet in our master bedroom was leaking around the floor. I turned the water off, flushed it one last time to get the water out of the tank, and called the plumber, who stopped by today. I wasn't there, but my g/f took a bunch of notes. He unbolted the toilet and pulled the flange out...
View more questions Search
|
