Ask Experts Questions for FREE Help !
Ask
    racerrmk's Avatar
    racerrmk Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2012, 03:54 PM
    Furnace will not turn on blower
    When power is turned on the light blinks at the quick rate. The burner comes on and after a couple of minutes the light gores to the 4 blink, open high limit device. The blower never comes on.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 12, 2012, 05:07 PM
    Once your furnace board trips due to a high limit it will not run until you find the reset button and reset the high limit, usually are 2-4 switches. Which furnace do you have, exact model an brand?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I turn on just the blower in my furnace? [ 7 Answers ]

I live in a mobile home. I had the furnace replaced last year. The old one had two places to plug the blower into. One was for the heat, and the other was just to have to blower running by itself. I would like to be able to have just the blower on by itself. How do I do that?

Blower in furnace does not turn on [ 6 Answers ]

Gentlemen... turned air on for the 1st time this year. a/c unit outside fires up fine... but blower in furnace does not. Replaced thermostat during winter because blower would not shut off. After installation furnace worked as it should. I must have wired thermostat wrong? Thanks for any and all...

Blower for furnace won't turn on [ 2 Answers ]

I have just re-lit my pilot light for the winter. The furnace is turning on with the thermostat set, but the blower isn't. If I put the blower to manual it turns on, but not in the auto setting. What do I need to do?

Furnace blower won't turn on [ 8 Answers ]

I have a Bryant 395C furnace. The blower won't come on even when thermostat fan switch is set to "on." I've verified that I'm getting 24V AC between terminals marked G and C on the furnace. Blower has 3 wires going into circuit board on furnace. These are colored red, black, and white; red is...

View more questions Search