Ask Experts Questions for FREE Help !
Ask
    hillbillytude's Avatar
    hillbillytude Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2012, 04:49 PM
    Heat pump lines
    How hot should the lines from the heat pump be at the blower unit? I can put my hand on them, they are warm, not hot.

Check out some similar questions!

I have a 4 ton rued heat pump with auxiliary gas heat pump quits working [ 1 Answers ]

I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be

Heat pump low side and high side lines both warm I have comfortmaker 13 seer [ 2 Answers ]

Both my high side and low side are reading 115 psi. High side line is warm and low side is warmer, not getting sufficient heat what could be the cause? Could it be the valve?

Should the lines coming from my heat pump going into the house be wrapped? [ 2 Answers ]

I just had my heat pump replaced. My old unit had some sort of black foam insulation covering at least one of the pipes that runs into the house. Now that the new unit is in place, the foam is laying on the ground. My question: is the foam really necessary? If so, can I pick it up at Lowe's or Home...

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

Is a heat pump with emergency heat a multi stage heat pump [ 1 Answers ]

I am trying to replace the thermostat for my heat pump the one I've got seems to be running the emergency heat only. All wires were connected as they were in the old one. Is regular heat and emergency heat considered multi-stage? If so, I need another thermostat... please advise.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.