Ask Experts Questions for FREE Help !
Ask
    Dr_Zoidberg57's Avatar
    Dr_Zoidberg57 Posts: 5, Reputation: 1
    New Member
     
    #1

    Feb 9, 2012, 08:47 PM
    Pilot Ignitor Comes Back On After Furnace Has Been Running A While
    I have been called upon to assist a neighbor lady in fixing a problem she is having with her furnace. It is the same as my own, a 28 y/o Carrier (model #396GAW000075). It starts its cycle without any problems. After it has been running for about 10 minutes or so, the pilot ignitor starts to click/spark. The clicking gradually picks up speed and then there is a single louder click as if the pilot is trying to light (this is just a guess and I may be totally wrong as to what is happening at this point). This continues until the furnace turns off. I would greatly appreciate it if someone could diagnose this problem and how do I go about fixing it. I am trying to help my neighbor save a few dollars.
    SeattlePioneer's Avatar
    SeattlePioneer Posts: 97, Reputation: 9
    Junior Member
     
    #2

    Feb 10, 2012, 02:01 PM
    Take the cover off the burner compartment of the furnace. Observe the sequence of events that occurs at the furnace when you turn up the thermostat and post that sequence of events in order and in detail.

    You aren't observing what is happening in enough detail to be able to determine what the problem is.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does the maytag dryer model #ldg9806aae have a pilot or an ignitor [ 0 Answers ]

I would like to troubleshoot the maytag gas dryer model # LDG9806AAE quiet plus

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

1995ish York Gas Furnace Running, pilot on, no heat [ 4 Answers ]

I tried to start my furnace this morning and all seemed to come on except for the main burners. The pilot was out so I started that, the blower came on as before, but still no main burners. I had the thermostat replaced at the end of March. I believe this York is from 1995 and the model # is...


View more questions Search