Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replaced cast iron waste with PVC.need to caulk?
[ 1 Answers ]
My connections from cast iron to PVC are made using no-hub couplings. They seem like a good seal, but should I add some caulking (flexible, waterproof, etc) just in case? Or not worth it?
Cast iron vent stack and PVC waste lines
[ 1 Answers ]
I decided to replace the cast iron portions of my waste lines from a double vanity sink to the waste line. Previously a plumber had replaced the accessible portions with PVC so I have quite a mix. Now that I have opened up the wall, I see that I have a cast iron vent stack / hub (see pics: ) that...
Replace sch 40 pvc to cast iron saddle 4 in pvc pipe broke
[ 4 Answers ]
Replace sch 40 pvc into cast iron saddle with lead pvc pipe broke off even with lead packing what is the easiest way to remove pvc and lead to replace it
PVC to cast iron waste line - odd size
[ 16 Answers ]
Hello all. I recently stumbled onto this site and have found it very helpful in answering most of my plumbing questions. My current home fix-it project has hit a speed bump and I could use a little help/advice. I was replacing the worn (40+ yr old) faucet in my bathroom sink when I found that...
Cast iron or PVC waste/drain pipes?
[ 5 Answers ]
Hi everyone. I'm in the middle of a major remodel to my 1947 home, including adding a second story. We're trying to do everything top-notch, which leads me to the experts here. Here's my question: For the waste/drain pipes, I know we want to use cast iron in the drops between the floors (for... View more questions Search
|