Ask Experts Questions for FREE Help !
Ask
    lee.30's Avatar
    lee.30 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2012, 07:42 AM
    Electric shower fitted but cutting out
    I am a recently qualified plumber and have installed an electric shower to the mains pipe, the water pressure is correct and it also has the correct fuse,when turning the unit on it runs for a second or two then cuts out, it's a creda unit, could you give me any suggestions
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Feb 3, 2012, 05:55 PM
    Hi Lee

    We don't use electric showers over here in the USA, at least not yet, so I have to figure that you'll know more by far than we do.

    A call to the manufacturer of the product and a quick chat with the technical department should help you solve the issue quick enough... ;)

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Re-cutting shower glass door [ 9 Answers ]

If a glass door is cut to fit and then the tiles are adjusted and then trying to fit the same door. The contractors are saying that the glass door cannot be cut twice it will shutter into pieces. I am not sure what to do. Are they telling the truth or lying. Please help. You will save us $1200.00...

Electric hot water heater keep cutting off [ 1 Answers ]

I noticed a previous post where the person asking the question didn't know were the reset switch is. My reset switch is located on the main thermostat top above the heating element. I hit the reset switch and the water is hot for about two to three days. I notice were someone mentioned changing the...

Cutting down electric bill [ 3 Answers ]

Hello, I live with a friend who owns the home we live in. We've had a silent argument for several years. We live in Texas so the summers are really hot! We have a many plants and have moved most of them to the kitchen table, where I put up heat reflective film on the windows in there, but she...

Cutting for renovation shower plate [ 4 Answers ]

I was going to change a couple of three handle shower valve to a single handle and not open up the back walls. One is tile the other is a fiberglass tub. I was wondering what was the best means in each case to cut the oval for the plate in fiberglass and to cut tile. Also any particular shower...

Shower unit fitted with platform underneath [ 1 Answers ]

Is it advisable to have a shower unit fitted with a platform underneath so that if there were a leak it could be got to easily. I would be very grateful for anyone's views as to how important a platform would be. Pam

View more questions Search