Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sump pump won't stop running
[ 1 Answers ]
AT the moment the pit is full of water and I am concerned that water will be flooding my basement at any moment. I unplugged the unit since it would not stop. Pushing the switch up or down does not stop the motor and the ball sits below water level and it is not draining. 1. What could be the...
My water pump will not stop running and doesn't shut off.. new 1 hp craftsman jet
[ 3 Answers ]
Our Rural water stopped one day.. pump was toast.I had my plumber hook up a new 1 hp craftsman pump to replace the old one.(same,craftsman) did it just like the inst. Said.. 1" and 1 1/4" to water. Gage on top. Plumbed like picture,primed it and followed inst to start.. it won't get past 40 lbs and...
My water pump will not stop running and doesn't shut off.
[ 3 Answers ]
I'm on water catchment and I have a water pump to pump the water to my house. Usually, when I use the shower or toilest, the water pump turns on and brings pressure up to 40/60, then shuts off. This morning, after using the toilet, the pump went on, but kept on running (I had to pull the plug to...
My sump pump won't turn off after it has pumped the water out of the sump pit
[ 2 Answers ]
My sump pump is only 3 years old and it won't stop running after it has pumped the water out of the sump pit. What do I do to fix this? Is there a switch that I have to adjust? Please help.
How many holes should the basin of the ejector sump and how many for the sump pump?
[ 3 Answers ]
I have two different wells, one holds my ejector pump and the other one holds the sump pump. I recently was getting water in my sub basement and it was coming from between the basin w/ejector pump and the concrete. Once we drilled a hole in the basin the water drains from the concrete into the... View more questions Search
|