Oil furnace won't light. I thinks it's the black box on top. Can't think of name.

Check out some similar questions!

2 black and 2 white in ceiling box, can't figure how to connect light fixture [ 6 Answers ]

I recently took down a light fixture that was just a singe bulb sticking out of the ceiling. When I did, there were 2 blacks and 2 whites and one ground coming out of the ceiling. My new fixture has 2 bulbs and 2 whites and 2 blacks. How would I go about hooking these up? I will also add that...

What is a black box, 3x2x1.5" with a red and green light wired to the ignition is? [ 1 Answers ]

Its been wired to my cab by work - I think it is a fuel monitor but want to make sure it is not a tracker. On the box is marked FORD with a lot of numbers including E13 10190 and the letters SNP Thanks Will

Oil on top of furnace housing [ 0 Answers ]

10 yr. old bryant hi efficiency furnace with an oily substance that appears on the top of the unit, about 4 ft. above the floor of furnace room... has been doing this for 3 yrs. Or so... wipe it up and it is back in 2 days.

3 black wires, one white in light box [ 22 Answers ]

3 black wires are twisted together and connected to the blue and black on the old ceiling fan. The one white is connected to the one white on the fan. Have tried connecting these wires many different ways for a new remote controlled fan but no luck . This is a very old house with old wiring (I have...

Oil furnace won't light [ 3 Answers ]

Ran oil of oil, restarted unit, it came on and then just shut down. I can't get it to come back on to even blead the line. It is like it has no power, I have hit the reset but nothing happens, and when it is tripped the light doesn't even come on on the control (Honeywell) with 45 second delay....

View more questions Search

Check out some similar questions!

Add your answer here.