Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Black wire red wire and white wire spliced to 10/3 on a 220 circuit
[ 25 Answers ]
I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...
Can I use a ground wire for a ground and live black or hot wire at the same time?
[ 8 Answers ]
I only have 3 wires from my ceiling to connect to my fan/light, the black, white and bare ground. No problems setting up in this room to only one switch but I would like to have the duel fan/light switch in like in my other rooms without having to pull a wire from the ceiling down to the switch,...
220 volt 2-wire with ground
[ 7 Answers ]
My new electric wall oven has a 3-wire with ground (black, red, white & ground). The previous oven was attached to the current circuit which is #10 2-wire with ground (black, white, ground). How do I make this connection to run both the 110v & 220 volt components on the new oven?
Hard wire 3 wire to 4 wire 220 service
[ 1 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ? View more questions Search
|