| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Please help... How to wire Square D magnetic control box (8502)?
 [ 5 Answers ]
 Hello. I bought used Square D control box for the sauna heater. I have a 4 wire outlet coming from the breaker - red, black, white and bare but not sure what goes where... The control box is Class 8502, Type DG-1 Series A. It has L1, L2 terminals - which as I understand should connect to black... 
220V hookup of pool pump switch
 [ 2 Answers ]
 I get a voltage of 240 in to the switch and across the swithc when no load is on it, but lose everything when I hook up the pump. Does this indicate the pump is bad or my wireing is poor? 
220V wiring for a pool pump
 [ 9 Answers ]
 Hello, I have to replaced my pool pump motor which was making so much noise (Hayward SuperPump 1 HP; 230V). I also noticed that the switch located between the breaker and the pump was not working quite right; I had to jiggle it to turn the pump ON. So I bought an equivalent dipole switch and... 
Pool heat pump wiring 220v
 [ 6 Answers ]
 I have an older pool heatpump that needs 220v 25amps. I have 10/2 wiring to a 25 amp breaker in my box. I test 120v on each (black & white) to the ground wire. Nothing seems to work. I can bypass to get the fan to work, but it barely spins. Seems like I'm working on 1/2 power. I'm obviously no... View more questions Search 
 |