Ask Experts Questions for FREE Help !
Ask
    Ruger4570's Avatar
    Ruger4570 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2012, 11:10 AM
    Oil fired heater instructions
    I have a Monogram Ind. mod 1019 heater. Looks new, can't see any sign of use. Where can I get parts and instructions for safe use? Where could I sell it, and what do you think it might be worth?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 1, 2012, 05:28 AM
    Ask your local fuel oil provider,, he should be able to help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What should I set my aquastat for my oil fired system? [ 2 Answers ]

I am trying to find out for my friend. He has an oil fired system with an indirect Hot water retaining tank. His oil company put it at 180 - HI and 150 - LOW and he feels that was incorrectly too high. Since the last time his burner people were in, he had twins. Should the settings be lowered...

Furnace oil fired [ 7 Answers ]

I have a beckett oil fired furnace, that has an intermittent problem . If I turn it on most of the time it will come on an work perfect however if I set the thermostat to say 70 the furnace will recycle on and of as it should and then it may pop the reset if I reset it now it may start up and work...

How do you purge an Oil fired expansion tank? [ 1 Answers ]

Recently we had some repairs done on our house oil fired heater it was a forced water valve or something like that. Now it leaks water when the heater goes on from the pressure relive vaule. The service man came and said our pressure relive vale is leaking because expansion tank needs to be purged...

How do you install a mixing Valve on a oil fired heater? [ 3 Answers ]

My service tec said my water temperature in my house will be consistence and won't be to hot or cold if I install a mixing valve on the heater. Would I still need a mixing valve if I install a Tankless Heater? Thanks, Jim-PA [email protected]

Lennox oil fired furnace [ 1 Answers ]

I have a old lennox oil fired furnace. The transformer burnt the wires off and the unit is so old I am unable to find the x-former for it. The contacts go from side to side. All the replacement x-formers have contacts that go up and down. Does anybody know of any old Lennox dealers or service...

View more questions Search