 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Colman Furnace G8T08012UHA11A Don't Fire Up But Blows
Several power outages today may be the cause of my Horizontal Colman Furnace - Model# G8T08012UHA11A not firering up. The blower is working, but no heat due to the burner not firering up.
The FOUR FLASHES of the red LED light indicates High Aux. or Spill Limit Switch Open. I cleaned the element that would ignite the furnace and checked the two small switches, both with two wires attached, by depressing the center button, but did not hear or feel a click of sorts to indicate being reset. It is freezing in the house and I have no money to call a professional. I do have a friend who did the actual steps described above who is mechanically inclined, but this problem is more than he has the ability to recognize, but feels it is probably something relatively simple. Can it be something so simple he cannot see it? Please help me. Sharonk10 |
||||
|
||||
|
[QUOTE=sharonk10;1390350]Several power outages today may be the cause of my Horizontal Colman Furnace - Model# G8T08012UHA11A not firering up. The blower is working, but no heat due to the burner not firering up.
The FOUR FLASHES of the red LED light indicates High Aux. or Spill Limit Switch Open. I cleaned the element that would ignite the furnace and checked the two small switches, both with two wires attached, by depressing the center button, but did not hear or feel a click of sorts to indicate being reset. It is freezing in the house and I have no money to call a professional. I do have a friend who did the actual steps described above who is mechanically inclined, but this problem is more than he has the ability to recognize, but feels it is probably something relatively simple. Can it be something so simple he cannot see it? Please help me. You said "I cleaned the element that would ignite the furnace" What did this look like? Did it look like a piece of carbon on a ceramic base with a two wire plug attached? I would like for you to turn the furnace off for about an hour and then turn it back to heat and describe to me how the furnace acts. Please tell me so I will have a place to start to help you. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Colman furnace Serial # 048166476 Model # 7680c856 80,000 BTU input 60,000 BTU out put Standing pilot Coleman gas funace, model #7680C856 for mobile home worked great last year but since cold season hit, can't keep home warm Thought it might be the thermostat so replaced that with new one...
Have A Colman Furnace Dated 2003-model Number-dgaa070bdta-have A Lot Of Trouble With Combustion Air Switch-either Stuck Closed Or Open(have Purchased 3)had To Sucked On Hose To Combustion Air Switch To Make It Close And It Will Work For Awhile. Help
My colman furnace seems to light up with the ignition properly... the flames are good for the prewarm period, then it clicks 3 times and turns off. I f this happens during the night, and doesn't come on... the small fan that removes unwanted gas before ignition is still running. If I power off...
I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...
I have a colman electric furnace in a late 80's mobile home. When the thermostate turns on the heating elements get hot but the fan will not start for 3 to 5 minutes. It will start after this time and run out the cycle. What keeps the motor from starting in this 3 to 5 minutes? Yes it is turned off...
View more questions Search
|
