 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I just had my water heater replaced and was given an energy star eco-friendly unit. But since the replacement, whenever I try to take a hot shower or fill my bathtub, the hot water trickles out almost like the faucet isn't open all the way but it is. The cold water comes out fantastic.
No leakage of water is seen from pressure tank,had a new water pump installed 10 months ago, could gauge be at zero due to freezing any water pipes ? P.S no water inside tank is left.
I had to replace my pressure switch, I put on a pumptrol switch. The water pressure is fine when I turned on the water, but slows way down by the time the pump kicks back on. It does kick on at 40lbs. I have noticed that when the pump kicks on at 40, it takes about 10 - 15 minutes to get up to 60...
I recently bought a water pressure gauge and learned that the pressure at two outside faucets on my house is 51 psi. I bought the gauge because I thought our pressure was pretty lousy. For example, if I try to run a lawn sprinkler on the front and back lawns at the same time, the area the...
View more questions Search
|
