 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
E2eb-015ha
My furnace has been acting up for some time. The coils will heat up but the fan, in the auto mode, won't kick on. I can put the fan in the fan only and it will run. I have replaced all 3 relays in the furnace. I have replaced the thermostat and the cap on the motor. It still does the same thing. It will work for a while and then not stsrt the motor. Can some one please help.
Thanks |
||||
Check out some similar questions!
Heating and air unit
A few days ago the heat would not kick on so we turned it off and on at the thermostat a few times and it finally kicked on and worked fine for about a day. Then the same thing happened again. We then did the same thing by turning the thermostat up and down until it finally kicked on. The next day...
When i turn on heater the blower hums then i hit it it starts to turn then it works fine sometimes it gets stuck . How do i fix that?
Nordyne model E1EB-015HA How do I check the sequencer's and limit switches what are the omh's values or what should be open or closed on the bench, I have the furance and coils on the bench for testing. Unit blows transformer in service. Was great before I cleaned the cooling coils above the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
