 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hvac ducts
I have square galvanized dust work in my crawl space. And I am wondering, there are some holes in it and is not insulated. So, should I replace it with round insulated duct, replace the parts with holes in them and then put insulation on it or do they even need insulation? I live in northern Missouri where the winters can be long and summers can be long.
|
||||
Check out some similar questions!
I had my air ducts cleaned a year ago (big big mistake) and immediately had a sickening odor. Had them re-cleaned and sanitized and still bad odor. Had evaporator coil cleaned and again 6 months later. Then had UV light installed. Now I have a chlorine odor that permeates everything in the...
I am setting up some HVAC Zones in my home. I bought the motorized dampers and the bypass dampers. I did not take a scientific approach and just guessed at the size of the ducts/dampers based on what was there. That is if the "zone" had one sized, I added a "feeder" duct 2-3 inches bigger. Now I am...
Is there any rule of thumb about the size of a a/c return duct? I cannot get my house below 78 degrees when it is 90+ outside. Even when the house gets to 75 the thermostat will not turn off the unit. I have to dial in a higher number (78). Thks cobia13
I am in the process of buying a home built on crawl space foundation in Michigan. I don't have any experience with crawl spaces. The house was built in 1949 and return ducts are rusted and torn. I am not sure how does the plumbing keep from freezing etc. The house has an inspection report but does...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
